| Navigation |
| Geo-Dome Home |
| Forum Home |
| View All Threads |
| New thread |
| Member login |
| Title: | dome cover 1 piece or 2 piece | |
| Posted on: | 3/7/2011 12:32:35 PM | |
| Category | Construction Techniques and Tips | |
| Author | dougal | |
| Status | Open | |
| Views | 3153 | |
| Replies | (2) | |
| Hi there does anyone have any ideas on a cover for my 7.2 m diameter 5/8 dome. The fabric to be used is PVC 590g/m2. I need to consider if it was constructed as 1 piece will this pose possible problems for erection and dismantling. If it was in 2 pieces what would the best layout be, ie a cap and a lower half. If any one can shed some light on this much appreciated. Cheers Doug | |
 |
|
| [ Comments 2 ] |
| posted by admin | 09/03/2011 22:16:43 |
| Two or more pieces is definitely the way to go, I would do a ribbon type section around the base (pull the two ends together to tighten the fabric) then a top piece pulled down to tighten. I don't think it matters to much were you divide the two sections just make a nice neat join around the spars. | |
|
|
|
| posted by Adolfo | 09/01/2012 00:25:59 |
| Hi: I am loking for dome cover plans for a 5 meter and 6 meter dome, or the equivalent size english measure. thank you Adolfo Aguirre 9.565.3238 | |
|
|
|
Login to add resources
Copyright © 2013 Geo-Dome.co.uk. All Rights Reserved.